# Test evaluation of replication table filter rules
#
# ==== Purpose ====
#
# Test if replication table filter rules are properly evaluated when
# some of the tables referenced by the multiple-table update do not
# exist on slave.
#
# ==== Method ====
#
# Master creates tables t1, t2, t3, t4, t5, t6, t7, t8, t9 and the
# slave is started with the following replication table filter rules:
#
# --replicate-do-table=t1
# --replicate-do-table=t2
# --replicate-do-table=t3
#
# and
#
# --replicate-ignore-table=t4
# --replicate-ignore-table=t5
# --replicate-ignore-table=t6
#
# So the slave only replicate changes to tables t1, t2 and t3 and only
# these tables exist on slave.
#
# From now on, tables t1, t2, and t3 are referenced as do tables,
# tables t4, t5, t6 are referenced as ignore tables, and tables t7,
# t8, t9 are referenced as other tables.
#
# All multi-table update tests reference tables that are not do
# tables, which do not exist on slave. And the following situations
# of multi-table update will be tested:
#
# 1. Do tables are not referenced at all
# 2. Do tables are not referenced for update
# 3. Ignore tables are referenced for update before do tables
# 4. Only do tables are referenced for update
# 5. Do tables and other tables are referenced for update
# 6. Do tables are referenced for update before ignore tables
#
# For 1, 2 and 3, the statement should be ignored by slave, for 4, 5
# and 6 the statement should be accepted by slave and cause an error
# because of non-exist tables.
#
# ==== Related bugs ====
#
# BUG#37051 Replication rules not evaluated correctly


source include/have_binlog_format_statement.inc;
source include/master-slave.inc;

# These tables are mentioned in do-table rules
CREATE TABLE t1 (id int, a int);
CREATE TABLE t2 (id int, b int);
CREATE TABLE t3 (id int, c int);

# These tables are mentioned in ignore-table rules
CREATE TABLE t4 (id int, d int);
CREATE TABLE t5 (id int, e int);
CREATE TABLE t6 (id int, f int);

# These tables are not mentioned in do-table or ignore-table rules
CREATE TABLE t7 (id int, g int);
CREATE TABLE t8 (id int, h int);
CREATE TABLE t9 (id int, i int);

INSERT INTO t1 VALUES (1, 1), (2, 2), (3, 3);
INSERT INTO t2 VALUES (1, 1), (2, 2), (3, 3);
INSERT INTO t3 VALUES (1, 1), (2, 2), (3, 3);

INSERT INTO t4 VALUES (1, 1), (2, 2), (3, 3);
INSERT INTO t5 VALUES (1, 1), (2, 2), (3, 3);
INSERT INTO t6 VALUES (1, 1), (2, 2), (3, 3);

INSERT INTO t7 VALUES (1, 1), (2, 2), (3, 3);
INSERT INTO t8 VALUES (1, 1), (2, 2), (3, 3);
INSERT INTO t9 VALUES (1, 1), (2, 2), (3, 3);

# Only t1, t2, t3 should be replicated to slave
sync_slave_with_master;
echo [on slave];
SHOW TABLES LIKE 't%';

connection master;
echo [on master];

#
# Do tables are not referenced, these statements should be ignored by
# slave.
#
UPDATE t7 LEFT JOIN t4 ON (t4.id=t7.id) SET d=0, g=0 where t7.id=1;
UPDATE t7 LEFT JOIN (t4, t5, t6) ON (t7.id=t4.id and t7.id=t5.id and t7.id=t6.id) SET d=0, e=0, f=0, g=0 where t7.id=1;
UPDATE t4 LEFT JOIN (t7, t8, t9) ON (t4.id=t7.id and t4.id=t8.id and t4.id=t9.id) SET d=0, g=0, h=0, i=0 where t4.id=1;
UPDATE t7 LEFT JOIN (t8, t9) ON (t7.id=t8.id and t7.id=t9.id) SET g=0, h=0, i=0 where t7.id=1;

#
# Do tables are not referenced for update, these statements should be
# ignored by slave.
#
UPDATE t1 LEFT JOIN t4 ON (t1.id=t4.id) SET d=0 where t1.id=1;
UPDATE t1 LEFT JOIN t7 ON (t1.id=t7.id) SET g=0 where t1.id=1;
UPDATE t1 LEFT JOIN (t4, t5, t6) ON (t1.id=t4.id and t1.id=t5.id and t1.id=t6.id) SET d=0, e=0, f=0 where t1.id=1;
UPDATE t1 LEFT JOIN (t4, t5, t8) ON (t1.id=t4.id and t1.id=t5.id and t1.id=t8.id) SET d=0, e=0, h=0 where t1.id=1;
UPDATE t1 LEFT JOIN (t7, t8, t5) ON (t1.id=t7.id and t1.id=t8.id and t1.id=t5.id) SET g=0, h=0, e=0 where t1.id=1;
UPDATE t1 LEFT JOIN (t2, t3, t5) ON (t1.id=t2.id and t1.id=t3.id and t1.id=t5.id) SET e=0 where t1.id=1;

#
# Ignore tables are referenced for update before do tables, these
# statements should be ignore by slave.
#
UPDATE t4 LEFT JOIN t1 ON (t1.id=t4.id) SET a=0, d=0 where t4.id=1;
UPDATE t4 LEFT JOIN (t1, t7) ON (t4.id=t1.id and t7.id=t4.id) SET a = 0, d=0, g=0 where t4.id=1;
UPDATE t4 LEFT JOIN (t1, t2, t3) ON (t1.id=t4.id and t2.id=t4.id and t3.id=t4.id) SET a=0, b=0, c=0, d=0 where t4.id=1;
UPDATE t4 LEFT JOIN (t1, t2, t5) ON (t1.id=t4.id and t2.id=t4.id and t5.id=t4.id) SET a=0, b=0, e=0, d=0 where t4.id=1;
UPDATE t4 LEFT JOIN (t1, t6, t7) ON (t4.id=t1.id and t4.id=t6.id and t4.id=t7.id) SET a=0, d=0, f=0, g=0 where t4.id=1;
UPDATE t7 LEFT JOIN (t4, t1, t2) ON (t7.id=t4.id and t7.id=t1.id and t7.id=t2.id) SET a=0, b=0, d=0, g=0 where t7.id=1;
UPDATE t7 LEFT JOIN (t8, t4, t1) ON (t7.id=t8.id and t7.id=t4.id and t7.id=t1.id) SET a=0, d=0, g=0, h=0 where t7.id=1;

# Sync slave to make sure all above statements are correctly ignored,
# if any of the above statement are not ignored, it would cause error
# and stop slave sql thread.
sync_slave_with_master;
connection master;

# Parameters for include/wait_for_slave_sql_error_and_skip.inc:
# Ask it to show SQL error message.
let $show_slave_sql_error= 1;
# The expected error will always be 1146 (ER_NO_SUCH_TABLE).
let $slave_sql_errno= 1146;

#
# Only do tables are referenced for update, these statements should
# cause error on slave
#
UPDATE t1 LEFT JOIN t4 ON (t1.id=t4.id) SET a=0 where t1.id=1;
source include/wait_for_slave_sql_error_and_skip.inc;

UPDATE t1 LEFT JOIN (t4, t7) ON (t1.id=t4.id and t1.id=t7.id) SET a=0 where t1.id=1;
source include/wait_for_slave_sql_error_and_skip.inc;

UPDATE t1 LEFT JOIN (t2, t4, t7) ON (t1.id=t2.id and t1.id=t4.id and t1.id=t7.id) SET a=0, b=0 where t1.id=1;
source include/wait_for_slave_sql_error_and_skip.inc;

UPDATE t1 LEFT JOIN (t2, t3, t7) ON (t1.id=t2.id and t1.id=t3.id and t1.id=t7.id) SET a=0, b=0, c=0 where t1.id=1;
source include/wait_for_slave_sql_error_and_skip.inc;

#
# Do tables and other tables are referenced for update, these
# statements should cause error on slave
#
UPDATE t1 LEFT JOIN t7 ON (t1.id=t7.id) SET a=0, g=0 where t1.id=1;
source include/wait_for_slave_sql_error_and_skip.inc;

UPDATE t7 LEFT JOIN t1 ON (t1.id=t7.id) SET a=0, g=0 where t7.id=1;
source include/wait_for_slave_sql_error_and_skip.inc;

UPDATE t1 LEFT JOIN (t4, t5, t7) ON (t1.id=t4.id and t1.id=t5.id and t1.id=t7.id) SET a=0, g=0 where t1.id=1;
source include/wait_for_slave_sql_error_and_skip.inc;

UPDATE t1 LEFT JOIN (t4, t7, t8) ON (t1.id=t4.id and t1.id=t7.id and t1.id=t8.id) SET a=0, g=0 where t1.id=1;
source include/wait_for_slave_sql_error_and_skip.inc;

UPDATE t1 LEFT JOIN (t7, t8, t9) ON (t1.id=t7.id and t1.id=t8.id and t1.id=t9.id) SET a=0, g=0, h=0, i=0 where t1.id=1;
source include/wait_for_slave_sql_error_and_skip.inc;

UPDATE t7 LEFT JOIN (t1, t2, t3) ON (t7.id=t1.id and t7.id=t2.id and t7.id=t3.id) SET g=0, a=0, b=0, c=0 where t7.id=1;
source include/wait_for_slave_sql_error_and_skip.inc;

UPDATE t7 LEFT JOIN (t4, t5, t3) ON (t7.id=t4.id and t7.id=t5.id and t7.id=t3.id) SET g=0, c=0 where t7.id=1;
source include/wait_for_slave_sql_error_and_skip.inc;

UPDATE t7 LEFT JOIN (t8, t9, t3) ON (t7.id=t8.id and t7.id=t9.id and t7.id=t3.id) SET g=0, h=0, i=0, c=0 where t7.id=1;
source include/wait_for_slave_sql_error_and_skip.inc;

#
# Do tables are referenced for update before ignore tables
#
UPDATE t1 LEFT JOIN t4 ON (t1.id=t4.id) SET a=0, d=0 where t1.id=1;
source include/wait_for_slave_sql_error_and_skip.inc;

UPDATE t1 LEFT JOIN (t4, t5, t6) ON (t1.id=t4.id and t1.id=t5.id and t1.id=t6.id) SET a=0, d=0, e=0, f=0 where t1.id=1;
source include/wait_for_slave_sql_error_and_skip.inc;

UPDATE t4 LEFT JOIN (t1, t5, t6) ON (t4.id=t1.id and t4.id=t5.id and t4.id=t6.id) SET a=0, e=0, f=0 where t4.id=1;
source include/wait_for_slave_sql_error_and_skip.inc;

UPDATE t7 LEFT JOIN (t1, t4, t2) ON (t7.id=t1.id and t7.id=t4.id and t7.id=t2.id) SET a=0, b=0, d=0, g=0 where t7.id=1;
source include/wait_for_slave_sql_error_and_skip.inc;

sync_slave_with_master;
echo [on slave];

# We should only have tables t1, t2, t3 on slave
show tables like 't%';

# The rows in these tables should remain untouched
SELECT * FROM t1;
SELECT * FROM t2;
SELECT * FROM t3;

# Clean up
connection master;
echo [on master];
drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
--source include/rpl_end.inc